天津美隆航经销PETOL Gearench摩擦钳

PETOL GEARENCH公司成立于1927年，其第一款专利产品是一只用于小口径管子的手动工具。从这个工具开始，该公司已发展为拥有40多个产品线的企业，这些产品用于石油行业中的各个领域，包括勘探、钻井、成产和提炼等工艺步骤。这些工具也在水井、非开挖技术钻井、采矿、发电应用和一般工业领域中得到应用。

一、PETOL Surgrip Friction Tongs

PETOL FRICTION TONGS W/CHAIN were designed especially for holding and turning pipe that must be carefully protected. The tongs have no bits or teeth inserts to mar the surface and therefore must turn the pipe by friction alone. The tongs are easily applied and removed and cannot jam or bind. Perfect ratcheting action and efficient performance are assured. When ordering, make sure to specify the exact O.D. on which the tongs are to be used.

此摩擦钳主要用于在握住和旋转管子的过程中需要保护的操作。由于钳子本身没有齿片或齿部嵌件来损坏表面，因此在操作的过程中仅需通过摩擦来转动管子。此摩擦钳操作简便，能够保证齿合度。您在订购此产品时，要明确所使用钳子的精确外径尺寸。

二、PETOL Friction Tongs w/Chain

PETOL FRICTION TONGS W/CHAIN were designed especially for holding and turning pipe that must be carefully protected. The tongs have no bits or teeth inserts to mar the surface and therefore must turn the pipe by friction alone. The tongs are easily applied and removed and cannot jam or bind. Perfect ratcheting action and efficient performance are assured. When ordering, make sure to specify the exact O.D. on which the tongs are to be used.

此摩擦钳主要用于在握住和旋转管子的过程中需要保护的操作。由于钳子本身没有齿片或齿部嵌件来损坏表面，因此在操作的过程中仅需通过摩擦来转动管子。此摩擦钳操作简便，能够保证齿合度。您在订购此产品时，要明确所使用钳子的精确外径尺寸。

三、PETOL Surgrip Friction Vise

PETOL SURGRIP FRICTION VISES provide oil field pump manufacturers and pump repair shops with a friction vise having superior noncrushing and nonmarring features for use in final assembly or repair of sub-surface pumps.
Surgrip Friction Vises come in two sizes, ZV35-52 and ZV55-54. Interchangeable aluminum bushings are available to meet specific O.D. requirements.
The ZV55-54 PETOL Surgrip Friction Vise can be fitted with special adaptor bushings enabling it to handle all the smaller O.D.'s of the ZV35-52.
Note: Vise Plate, Vise Plate Bolt & Nuts, and Vise Bushings must be ordered separately.

油田泵制造商和泵维修厂所供应的摩擦夹钳在总装配或深井泵修复的应用中具有耐挤压和耐磨损特性。它有两种规格：ZV35-52 和 ZV55-54，可更换的铝衬套符合特定的外径要求。ZV55-54规格的摩擦夹钳可配备专用的适配器衬套，它用来处理所有较小ZV35-52规格的外径的摩擦夹钳。
注意：夹钳底板、夹钳底板的螺钉螺母、夹钳衬套需单独订购。

四、PETOL Surgrip Torque Wrench

PETOL SURGRIP TORQUE WRENCHES offer exact measurement in ft.-lbs. of torque when making up pump parts. Each wrench is bored to grip a specific O.D. by friction alone and will not mar the surface of the parts.
These wrenches offer the features of the PETOL Surgrip Friction Tong and can be used with any 1/2" or 3/4" drive “click-type” torque wrench handle.

在装配泵零件时，此扳手提供准确的扭矩测量（英尺-磅）。每个扳手仅通过摩擦就能夹住一个特定的外径，并且不损坏零件表面。这些扳手具有摩擦钳的特性，它们能和任何“1/2”或“3/4”驱动“点击式“扭矩扳手手柄一起使用。

五、PETOL Hydraulic Friction Breakout Unit

The PETOL HYDRAULIC FRICTION BREAKOUT UNIT will not mar the surface of the parts being made up and broken out. Each hydraulic Friction Tong and Surgrip Vise Bushing is bored to grip a specific O.D. by friction alone. The units are powered by an electric motor and have a pressure gauge that reads out in ft.-lbs. of torque and PSI. For added safety, a controlled pressure relief valve allows the operator to adjust the working pressure for each job. When the set pressure is accomplished the system stops torquing.
NOTE: Maximum working loads range from 500 ft.-lbs. to 5,000 ft.-lbs. depending on size of tong being used.

在装配或拆卸的过程中，此装置不会损害零件表面。每个摩擦钳和钳夹衬套仅通过摩擦就能夹住一个特定的外径。此装置是用一个电机驱动的，并有一个压力计来读取扭矩（英寸-磅）和时间的值。为了增加安全性，允许操作员通过控制减压阀来调整每次作业时的使用压力。当完成所设定的压力值，系统将停止扭转。
注意：所使用的钳子尺寸决定了最大工作负荷，它的范围是：“500英尺-磅”到“5000英尺-磅”。